不锈钢垭口套是否需要木工打底主要取决于具体的安装场景和需求。

　　Whether the stainless steel pass sleeve requires a wooden base mainly depends on the specific installation scenario and requirements.

　　一般情况下不需要木工打底

　　Generally, there is no need for carpenters to provide a base layer

　　不锈钢垭口套主要用于美化墙角线条和保护墙面，通常不需要木工打底。如果墙体表面平整，没有明显的凹凸不平，可以直接安装不锈钢垭口套。

　　Stainless steel mouth covers are mainly used to beautify wall corners and protect walls, and usually do not require woodworking as a base. If the surface of the wall is flat and there are no obvious unevenness, stainless steel mouth covers can be directly installed.

　　在某些情况下需要木工打底

　　In some cases, woodworking is required as a base layer

　　墙体表面不平整：如果墙体表面有明显的破损或不平整，需要进行修补或处理后再安装不锈钢垭口套。

　　Uneven wall surface: If there is obvious damage or unevenness on the wall surface, it needs to be repaired or treated before installing the stainless steel sleeve.

　　特殊安装需求：在某些需要连接或固定的场合下，可能需要进行木工打底处理，以确保安装的牢固性和美观性。

　　Special installation requirements: In certain situations where connection or fixation is required, woodworking primer treatment may be necessary to ensure the firmness and aesthetics of the installation.

　　木工打底的具体步骤和注意事项

　　Specific steps and precautions for woodworking base

　　木工找平：无论门洞口是拆了门的还是毛坯的，都需要让木工进行找平打底。这不仅仅是直接贴一层木板，而是要进行找平处理。

　　Carpenter leveling: Regardless of whether the door opening is dismantled or unfinished, the carpenter needs to level and base it. This is not just about sticking a layer of wooden board directly, but also about leveling it.

　　量尺定制：找到当地的不锈钢加工店或者网上联系商家，确定好颜色和尺寸后，商家会安排人过来量尺或提供实际安装尺寸。

　　Customization of measuring tape: Find a local stainless steel processing shop or contact the merchant online to determine the color and size. After that, the merchant will arrange for someone to measure the tape or provide the actual installation size.

　　安装过程：如果包安装的话，需要支付安装费。通常使用结构胶粘贴，并用木条支撑直到胶水干透。

　　Installation process: If the package is installed, an installation fee needs to be paid. Usually, structural adhesive is used for bonding, and wooden strips are used to support until the adhesive dries completely.

　　注意事项：洞口较大时，要确认电梯能否上楼，不行的话需要从楼梯搬运。安装时要确保垂直度和水平度，避免安装后发现不直。

　　Attention: When the opening is large, it is necessary to confirm whether the elevator can go upstairs. If not, it needs to be transported by stairs. During installation, ensure verticality and levelness to avoid discovering unevenness after installation.

　　本文由枣庄不锈钢哑口套提供帮助，更多的相关内容请点击：http://www.sddtmt.com希望本文能够为您带来帮助，感谢您的阅读！

　　This article is assisted by Zaozhuang Stainless Steel Mute Cover. For more related content, please click: http://www.sddtmt.com I hope this article can be helpful to you. Thank you for reading!